■   Negative pressure forming machineYK-L64D-5V100A系列，It consists of 1 set of forming power cabinet (5V30A,32 points), 2 sets of needle bed fixture sets (16 points/set) and 1 set of negative pressure vacuum system (2 layers, each layer 2 pipes with diameter of 32mm, 32 points, each single pipe diameter of 16mm, fluorine rubber anticorrosive sucker); (Power supply and fixture group are placed separately).

■   Series of products with protection functions :1) data abnormal recovery; 2) Software over voltage, under voltage, over current, under current, over capacity protection 3) The range of voltage and current protection value can be set, which can be prompted and recorded after protection; 4) Set high alarm light, prompt state; 5) Set emergency stop button, emergency stop fixture automatically open; 6) Installed with smoke alarm, when the smoke alarm occurs, the machine stops running and alarms; 7) After the equipment alarm stops, the unfinished process can be continued from the interrupted position, without starting the process from scratch; 8) If the communication between the lower computer and the upper computer is interrupted, the work can continue according to the original process after the communication is restored to normal; 9) When the equipment is abnormally powered off, the current process can continue; 10) When the time communication is interrupted or the PC is faulty, the device will automatically enter the waiting state, and the current process will continue after the communication is quickly reset.