■ Semi-automatic laminating machine experimental equipment YK-DP-300 ，實The position correction and lamination process of the current and subsequent pole pieces are completed by automatic, which has the characteristics of high lamination efficiency and high lamination accuracy. The device design can be stacked up to 200*200mm cells, different sizes can be achieved by adjusting the fixture, very suitable for the research and development of laminated lithium-ion batteries and sample production. The device adopts a single cantilever structure design, the coil isolation film automatic constant tension control, the motor drives the diaphragm to move left and right to achieve Z-shaped lamination.
● High reliability
■
1, the number of laminated pieces can be automatically controlled according to pre-set;
2, the use of compatibility design, the battery size change can be achieved by adjusting the positioning fixture, the adjustment range is large;
3, PLC control, HMI operation, easy to use and maintain;
4, pole piece of human tooling, automatic positioning, robot automatic suction, automatic stacking;
5, isolation film strong guidance, pole mechanical positioning, to ensure high lamination accuracy;
■ Used for lithium cell positive, negative electrode and diaphragm Z-shaped laminated assembly
Semi-automatic laminating machine experimental equipment |
YK-DP-300 |
|
Laminated mode |
Zigzag laminated |
|
Mode of operation |
Manual feeding, mechanical hand taking sheet, automatic pulling diaphragm |
|
Lamination accuracy |
The uniformity is better than ±0.5mm |
|
Lamination range |
Battery Min.L62mm *W46mm, Max. L200mm*W200mm |
|
Laminated thickness |
Max.30mm |
|
Number of layers |
Max.500 can be set |
|
Diaphragm diameter |
Max. 250mm |
|
Diaphragm core |
3 inch core, mechanically clamped |
|
Mounting dimension |
L1200mm*W800mm*H900mm |
|
Weight |
500Kg |
|
Power source |
Voltage single-phase AC220V±10%(customized 110VAC), frequency 50Hz/60Hz, power 1KW |
|
Air source |
0.5~0.8MPa compressed air |
|
Use environment |
The recommended ambient temperature is 25±3 ° C, humidity is 30 to 90RH, and no vibration or electromagnetic interference is required |
|
