■ Semi-automatic pole die cutting machineYK-MQ-350 ，350 series automatic pole die cutting machine is mainly used in lithium battery pole die cutting material automatic forming, manual receiving process. The equipment has achieved advanced control technology and optimized design and reasonable structure in the industry
● High reliability
■
The material suspension mechanism, using an inflatable shaft with a high-strength support structure at both ends, can withstand materials weighing up to 100kg,
and the opening and closing Angle can reach more than 70°, making it very easy to load and unload materials
Multiple sets of large diameter overroll structure are adopted to provide smooth feeding mode for materials and reduce the damage caused by bending of materials.
Japan Yaskawa servo motor drive, Taiwan on the silver wire rod, guide rail transmission, can achieve efficient and precise feeding action, feeding efficiency of up to 30 times/minute.
■ Applied to the lithium battery electrode material automatic die-cutting molding, manual receiving process
Semi-automatic pole die cutting machine |
YK-MQ-350 |
|
Die cutting speed |
30 strokes per minute (adjustable speed according to feeding length) |
|
Maximum overfeed width |
350 mm |
|
Maximum feed width |
350mm |
|
Maximum molding size |
330 mm × 320 mm |
|
Maximum die cutting speed |
30次/min |
|
Roll correction accuracy |
±0.2mm |
|
Conveyor belt service life |
It has been recycled about 20,000 times |
|
Power required by the whole machine |
7KW |
|
Applicable voltage of the whole machine |
AC380V±10% |
|
Voltage |
AC220V(Customer specification) |
|
Required air pressure |
Pressure 0.5 ~ 0.7Mpa (customer's own) |
|
Negative pressure required for the machine |
-70kpa（customer-owned） |
|
Total machine weight |
1800KG |
|
Feed step accuracy |
≦0.1mm(Customer specification) |
|
